Developing a Waste Management Start-Up as Efforts to Accelerate the Circular Economy
Pengembangan Start-Up Pengelolaan Sampah Sebagai Upaya Akselerasi Ekonomi Sirkular
DOI:
https://doi.org/10.31849/dinamisia.v8i4.21242Keywords:
start-up, sampah plastik, limbah kaca, paving block, bank sampahAbstract
The purpose of developing this start-up is to organize the collection of waste in the community, in the form of plastic and glass waste. This waste will be managed at the Self-Realization Waste Bank to become new, more valuable products. Plastic waste will be shredded into smaller pieces and melted. The melted plastic will then be transformed into paving blocks. Meanwhile, glass waste will be crushed into artificial sand, which will also be used to make paving blocks. The collection of plastic waste and glass waste is organized through a web-based start-up that can be accessed by the general public. The method used involves socializing the program and practicing product manufacturing. The results of the activities show that partners can operate the developed start-up and can already create products from plastic waste and glass waste. Partners can also transform glass waste into artificial sand. Products produced from plastic waste and glass waste can be used as surface covers for pedestrian paths and parking areas.
References
Adelodun, A. A. (2021). Plastic Recovery and Utilization: From Ocean Pollution to Green Economy. Frontiers in Environmental Science, 9, 1–12. https://doi.org/https://doi.org/10.3389/fenvs.2021.683403
Aisyah, S., Ginting, S. M., Novita, E., & Rosa, K. A. (2014). Pemanfaatan Sampah Plastik Menjadi Produk Bernilai Jual Dengan Model Trashion. Dharma Raflesia Unib, 12(1), 44–54.
Berliana, I. G. A. A. A., Raharja, I. G. M., & Artayasa, I. N. (2022). Proses daur ulang plastik sebagai furnitur yang memenuhi standar ergonomi. Jurnal Ilmiah Desain & Konstruksi, 21(2), 270–279. https://doi.org/http://dx.doi.org/10.35760/dk.2022.v21i2.7136
Conilie, M., Farihah, U., & Nasution, N. E. A. (2021). Utilization of plastic and fabric waste into economic valued products to minimize household waste. IOP Conf. Series: Earth and Environmental Science, 1–9.
Dewi, M., & Wibowo, M. (2019). Eksplorasi Produk Interior Dari Material Plastik Daur Ulang dan Sisa Serbuk Kayu. Jurnal Intra, 7(2), 522–530.
Murti, Z., Dharmawan, D., Siswanto, S., Soedjati, D., Barkah, A., & Rahardjo, P. (2022). Review of the Circular Economy of Plastic Waste in Various Countries and Potential Applications in Indonesia. Earth and Environmental Science, 1–8. https://doi.org/:10.1088/1755-1315/1098/1/012014
Nandy, S., Fortunato, E., & Martins, R. (2022). Green economy and waste management: An inevitable plan for materials science. Progress in Natural Science, 32(9), 1–9. https://doi.org/10.1016/j.pnsc.2022.01.001
Okatama, I. (2016). Analisa peleburan limbah plastik jenis polyethylene terphtalate (PET) menjadi biji plastik mellaui pengujian alat pelebur plastik. Jurnal Teknik Mesin, 5(3), 109–113.
Paeno, P., Kasmad, K., Sunarsi, D., Maddinsyah, A., & Supiyan, D. (2020). Pemanfaatan Sampah Plastik Untuk Kerajinan Rumah Tangga Taman Belajar Kreatif Mekar Sari. Baktimas, 2(1), 57–61.
Phuang, Z. X., Woon, K. S., Mong, G. R., Hanafiah, M. M., & Liew, P. Y. (2023). Assessing Plastic Waste Green Economy Management via Integrated Life Cycle Environmental and Costing Framework. Chemical Engineering Transactions, 106, 109–114. https://doi.org/10.3303/CET23106019
Purwanto, S., & Hikmah, D. (2023). Pemanfaatan Limbah Plastik Menjadi Biji Plastik Yang Bernilai Tambah Ekonomi Di Kelurahan Dadap Tangerang. Dedikasi, 2(1), 171–181. https://doi.org/https://doi.org/10.53276/dedikasi.v2i1.42
Rahmawati, C. (2023). Enhancing Industrial Production Quality Through Innovations and System Improvements in Paving Block Manufacturing. DINAMISIA: Jurnal Pengabdian Kepada Masyarakat, 7(3), 781–788.
Rahmawati, C., Muhtadin, M., Faisal, M., Iqbal, I., Zardi, M., Meliyana, M., & Nasruddin, N. (2022). Teaching industry: Pengolahan Limbah Kaca Menjadi Produk Konstruksi. Jurnal Vokasi, 6(2), 112–119.
Sudarwati, S., Kustiyah, E., Istiqomah, I., Chomsatu Samrotun, Y., Uddin, M. D., & Mukarromah, S. (2021). Pelatihan pembuatan tas cantik dengan pemanfaatan sampah plastik sebagai peluang usaha bagi ibu-ibu PKK di Bekonang Sukoharjo. Jurnal Budimas, 3(1), 141–148.
Syberg, K., Nielsen, M. B., Clausen, L. P. W., Calster, G. van, Wezel, A. van, Rochman, C., Koelmans, A. A., Cronin, R., Pahl, S., & Hansen, S. F. (2021). Regulation of plastic from a circular economy perspective. Current Opinion in Green and Sustainable Chemistry, 29, 100462. https://doi.org/https://doi.org/10.1016/j.cogsc.2021.100462
Wahida, A., & Fuad, F. (2022). Recycling Plastic Waste For The Development of Souvenir Products Special For Surakarta City. Mudra Jurnal Seni Budaya, 37(3), 271–280.
