Analisis Aliran Daya Pada Saluran 10 KV Dengan Menggunakan Digsilent Powerfactory
DOI:
https://doi.org/10.31849/nywm9w15Abstract
Every year the use of electrical energy always increases. This is of course driven by the use of electrical energy which is easy to apply and is almost used in various fields of life. Therefore, of course, the electric power system must have good quality and quantity. To make a quality electric power system, it is necessary to carry out a power flow analysis. This is a discussion of studies in electric power systems to determine parameters such as the amount of power losses, voltages, and currents. With a power flow study, of course, it will provide the information needed about an electric power system. In calculating the power flow is done by calculating the factors that form the basis of an electric power system. In analyzing a complex electric power system, it requires the help of a calculation application to make it easier to get the desired parameters. One of the commonly used applications is Digsilent Powerfactory. Digsilent Powerfactory is commonly used for calculation and simulation of electric power systems..
References
[1] Abrar Tanjung, (2021), “Analisis Aliran Daya Setelah Penghantar Pasir Putih-Garuda Sakti Beroperasi Pada PT. PLN (Persero) Unit Pelayanan Transmisi (UPT) Pekanbaru,” J. Sci. Res. Dev., vol. 3, no. 1, 2021.
[2] Saefrudin, D. (2015). Analisis Elektric Load Flow (Aliran Daya Listrik) Dalam Sistem Tenaga Listrik Menggunakan Software ETAP Power Station 4.00 Di Pt. Lokatex Pekalongan. Edu Elektrika Journal, 4(1).
[3] Al-afifi, U. F. (2021). Analisa Aliran Daya pada Sistem Tenaga Listrik menggunakan ETAP 12.6. SainETIn: Jurnal Sains, Energi, Teknologi, dan Industri, 6(1), 16-22.
[4] Saini, M., Yunus, M. Y., Akbar, R., & Yassir, M. (2019). Analaisis Jatuh Tegangan pada Sistem Kelistrikan 150 kV Sulselrabar Menggunakan Digsilent Powerfactory 15. Jurnal Teknik Mesin Sinergi, 16(2), 190-196.
[5] Noor, F. A., Ananta, H., & Sunardiyo, S. (2017). Pengaruh Penambahan Kapasitor Terhadap tegangan, arus, faktor daya, dan daya aktif pada beban listrik di minimarket. Jurnal Teknik Elektro, 9(2), 66-73.
[6] Putri, M., & Pasaribu, F. I. (2018). Analisis Kualitas Daya Akibat Beban Reaktansi Induktif (XL) di Industri. JET (Journal Of Electrical Technology), 3(2), 81-85.
